Knowledgebase
Magnetometer Device Interface
Posted by Jerry Knisley, Last modified by
Notice
Undefined index: editedstaff (C:/inetpub/wwwroot/Support/__swift/cache/8ffb74eb8fb5aeb3f7fb2e375265078e.php:44)
Copy to clipboard:
on 23 August 2016 12:40 PM

For collecting magnetometer data, HYPACK uses a single device interface that supports multiple manufacturers sensors. Below is a list of all of the sensors supported by HYPACK using the Magnetometer Interface in HYPACK. 


                                                                         The display shows the gamma reading at two scales simultaneously. The Blue scale is the lower scale and the Red scale is the higher values. In the display below the blue scale is at 10 nT spacing of the vertical lines and the red scale is at 100 nT spacing.