Knowledgebase
Automatic Range Scales for SURVEY / DREDGEPACK
Posted by Jerry Knisley, Last modified by
Notice
Undefined index: editedstaff (C:/inetpub/wwwroot/Support/__swift/cache/8ffb74eb8fb5aeb3f7fb2e375265078e.php:44)
Copy to clipboard:
on 23 February 2015 10:51 AM

There is a drop down selection in the SURVEY / DREDGEPACK program that is used to set the scale of the map to a pre-determined scale. In the previous versions of HYPACK these ranges could be user configured in the HYPACK HARDWARE program. With the conversion in HYPACK 2014 to the combined HARDWARE program these ranges are no longer configurable in the HARDWARE program. To modify the preset ranges the user can open the SURVEY32.ini in the current project. To add a range the user should modify the [Ranges] section in the file. There are two entries that must be changed, the COUNT and the new entry needs to be added.  

ORIGINAL
 
[Ranges]
Count=5
Value1=500
Value2=1200
Value3=2500
Value4=5000
Value5=10000
 
 
MODIFIED - I moved the items from 2500 to 10000 down and added the range of 1500
 
[Ranges]
Count=6
Value1=500
Value2=1200
Value3=1500
Value4=2500
Value5=5000
Value6=10000