Knowledgebase
Kongsberg MS 1000 Profiler
Posted by Jerry Knisley, Last modified by
Notice
Undefined index: editedstaff (C:/inetpub/wwwroot/Support/__swift/cache/8ffb74eb8fb5aeb3f7fb2e375265078e.php:44)
Copy to clipboard:
on 09 December 2014 02:07 PM

The MS 1000 profiler is supported in horizontal mount mode, used as a conventional multibeam. This driver does not support multiple profilers or sidescan modes. For these modes, there is a custom HYPACK driver which is beyond the scope of this document. The driver will also read heading if provided.

 

Connection:

Via a TCP/IP network interface to the MS 1000 software which can be on the same or different computer as HYPACK.  Default port 5000.

 

Notes:

  • the driver will record the detect sample from the imagery information as beam intensity.
  • a complete sector is logged as a single ping
  • angles which imply an inverted mount (ie 90 to 270) are rotated 180 degrees