RSS Feed
Knowledgebase : Sontek
     

Coverage of the system With the beams at 25 degrees on each side, we can achieve a coverage of almost 1 times water depth   _Coverage = 2 x tan(25) x water depth_ In 10 meters of water, the system will give the user an effective swath of 9.6 meters....
A test was conducted using the Sontek M9 Hydrosurveyor and a R2Sonic 2024 Multibeam. The survey was conducted in January of 2016. The test area was in Providence, RI and the surveys were conducted with the assistance of the USACE. Below is an image of the...
Previous to HYPACK 2017 with the Sontek M9 driver and using a Matrix the user needed to select "Use for Matrix Update" which was found in the Setup (Settings) window.  In HYPACK 2017 this has changed and removed from Settings window.  The user can now ena...
SYSTEM SETUP There are two ways to connect to the HydroSurveyor: • STANDARD SERIAL CONNECTION: Enter only the port number. The driver automatically determines the best baud rate, parity and stop bit. • RADIO MODEM AND UDP NETWORK CONNECTION: In this...
When using the Sontek M9 with the PCM Rover and PCM Base follow the connection dialog in the attached image.
When using the Sontek M9 with an external GPS follow the connection dialog in the attached image.