Sorry - either this article does not exist or you haven't been given permission to view it.
RSS Feed
Knowledgebase

ANNOUNCING THE RELEASE OF HYPACK 2017 After a year of work, the latest release of HYPACK is available. The HYPACK 2017 release...
REMOTE SUPPORT ON YOUR COMPUTER In the HELP menu item there is a menu item named REMOTE ASSISTANCE. When you select this m...
When switching from dual monitors to single monitor you might end up with a lost HYSWEEP Survey window. There is no easy butt...
Every year the HYPACK Support department travels to customer sites to conduct installation and training. Below is a list of the ...
WHY DOESN'T MY CUTTER DREDGE PIVOT ON THE STERN SPUD?  We get this questions very often here in HYPACK support. It is a very e...
HYPACK DQM FOR PIPELINE DREDGES   The United States Army Corps of Engineers will soon be requiring pipeline dredges over 18 ...
* Tells the operator how much material is above or below the template in the Matrix cell that the cutter tool is over * The ...
The final updates to HYPACK 2016 have been submitted. The link includes a full installation of the latest updates. The attached ...
IMPORTING DXF LINE WORK INTO EXISTING S57 ENC CHART Hold Shift and delete existing line work Import DXF file Select from t...
HYPACK RAW File Header Information. Interpretation: FTP: The first record located at the top of the header used to identify th...
HYSWEEP PERFORMANCE TEST WORK FLOW PREPARING THE SURVEY * Find a good location - very flat area, uniform bottom * Always...
HYPACK 2017 has a new feature in the Line Editor. In the Line Editor there is a new radio button labeled "Line Report" across th...
There are times where the SURVEY program does not close properly and the Matrix file has been compromised. Since the Matrix f...
SET CUTTER TOOL TO WATER SURFACE AND ZERO OUT THE HEIGHT OF THE CUTTER TOOL. IF THE TOOL AND ITS CALIBRATION POINT CANNOT TOUCH ...
DREDGEPACK - SWINGIND.DLL DEVICE DRIVER * Measures angle of cutter tool relative to * Planned Survey Line (*.LNW) * Pare...
If you are running a new install of HYPACK 2014, and having trouble connecting to a network key. I would suggest downloading ...
TIDAL ZONES & YOUR HSX MULITBEAM DATA The TIDAL ZONE program interpolates tide correction values between tide gauges spread ov...
DISPLAYING STATIONING IN DREDGEPACK It is possible to display Stationing or what we like to call "Chainaige" in DREDGEPACK...
CM2 sidescan by C-Max does not work in HYPACK 2014. In order to make it work you need to update STRSTL.dll to version 3.5.1 w...
One of the questions that we encounter are the different aiding options on the POS MV. (e.g. Auxiliary, Closely Coupled, and ...
You will need to have a copy of HYPACK installed on a compute in the office and have a HYPACK SURVEY key. You will then do th...
Recently came into a situation where the Subbottom Program failed and could only end through task manager. The problem was that ...
HYPACK launches but fails to operate on Panasonic Toughbook CF-53. The default Intel HD video driver is not compatible with HY...
Inclinometer.dll does fails to load in DREDGEPACK This can be caused by the Inclinometer.dll having a function of draft in HYP...